Always remove your shoes when inside and ask visitors to do the same.

Once the filter has fully dried, re-insert it into the bin and reattach the bin to the vacuum body..Your Gtech Multi Mk2 is now ready to use!.

re-insert the bin.replacing the filter.Running the Gtech Multi Mk2 without a filter could cause permanent damage to the vacuum cleaner’s motor.. What Should I Do If My Gtech Has Poor Suction?.

Low suction is nearly always caused by a blocked filter or an overfilled bin.So, these are the issues to check for first..

However, if cleaning the filter hasn’t fixed a low-suction problem, there is probably a blockage elsewhere in the vacuum.

The most likely culprits are the main tube, outlet from the bin (you’ll need to remove the bin to access this), and inside the tools.. It’s also possible that hair has become tangled around the Power Brush brushroll.Use the red lever to pull up the cylinder section of the vacuum from inside the canister.. Press the red button on the inside of the machine to fully remove the cyclonic section..

Remove the dust canister using the red clip on the bottom of the vacuum body..Your Dyson V7 is now ready to be cleaned!.

It’s also a good idea to put a layer of newspaper beneath the vacuum.Lots of dirt and debris will fall out during the cleaning process, so it’s easier just to throw away the newspaper at the end..